search

Watkins Caldera Spa Vacanza Series Owner's Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 18
SYSTEM MODE
Your spa is equipped with a System Mode. This function will allow you to conveniently turn the jet(s) on high speed and the light on maximum intensity at the same time.
To activate the system mode, perform the following functions:
Press the MODE ( or ) button until SYSON is displayed on the screen. Press the (
+)
  button to activate the SYSON mode feature. The jets
and light icons will illuminated on the display until the system mode is deactivated.
NOTE: Once activated, the jet and light functions can still be changed by pressing the JETS or LIGHT button.
To deactivate the system mode, press the MODE ( or ) button until the SYSON symbol is illuminated on the display. Press the (
-)
 button to deactivate.
MANUAL CLEAN CYCLE
All spas are equipped with a “Cleaning” mode. When the mode is activated, the jet pump in the first jet system will turn on and run for ten minutes (used for water
maintenance). To activate the “Cleaning" mode, press the MODE ( or ) button several times until the CLEAN menu is displayed. Press the (
+)
 button to activate the
CLEAN mode feature.
NOTE: The jet icon will flash on and off while the “Cleaning ” mode is active.
To stop the Cleaning Cycle before the ten minutes is complete, Press the MODE ( or ) button several times until the CLEAN menu is
illuminated then press the (
-)
  button to deactivate.
NOTE: Pressing the JETS button will also deactivate the clean cycle and the jet icon will remain on and solid
TOOLS MENU
The TOOLS menu is one of the main menus on the control panel. Within the TOOLS menu are seven submenus, which consists of; Temp Lock, Spa Lock, Light, Econ
or Summer Timer, Filter 1, Filter 2, LCD and Exit.
To enter into the TOOLS menu, scroll through the main menus using the MODE ( or ) button until the TOOLS menu is displayed. Press the (
+)
 button to enter into
the TOOLS submenu, use the MODE ( or ) button to scroll through the submenus. Once the desired submenu is displayed, press the (
+)
 button to activate the
submenu. To leave the TOOLS submenu, scroll through the submenu until EXIT is displayed, press the (
+)
button to exit the submenu.
LOCK FEATURES
The two locking features, SPA LOCK and TEMPERATURE LOCK, are enabled from the control panel by pressing the MODE ( or ) button until the TOOLS menu is
displayed. Then press the (
+)
 button to enter the TOOLS submenus. Use the MODE ( or ) button to scroll through the submenus to get to the locking features. Once
enabled, a lock will remain active until the specific button combination is applied to disable the lock. Even if power is disconnected from the spa and soon thereafter reapplied
(such as in a power outage) the lock will remain in place.
TEMPERATURE LOCK
The TEMPERATURE LOCK feature deactivates the temperature control function of the control panel. TEMPERATURE LOCK is most often used
by people who do not want others to tamper with or change the set temperature of the spa water.
TEMPERATURE LOCK is a submenu of the
TOOLS menu
To activate the TEMPERATURE LOCK, press the MODE ( or ) button in the TOOLS submenu until the TLOK- symbol is displayed on
the screen. Press the (
+)
 button to activate the
TEMPERATURE LOCK feature (TLOK+).
When the TEMPERATURE LOCK is activated, the JETS, LIGHT and any other features your spa may have will operate normally, and the
temperature setting can be
viewed but can NOT be changed. If a temperature button is pressed, TLOK will display for several seconds, then turns off.
To deactivate the TEMPERATURE LOCK, press the MODE ( or ) button in the TOOLS submenu until the TLOK+ symbol is illuminated on the display. Press the
(
-)
   button to deactivate the TEMPERATURE LOCK feature.
SPA LOCK
The SPA LOCK feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted use of the spa. The
SPA LOCK menu is a submenu of the TOOLS menu.
To activate the SPA LOCK, press the MODE ( or ) button in the TOOLS submenu until SLOK- is displayed on the screen. Press the
(
+)
button to activate the SPA LOCK feature.
When the SPA LOCK is activated, the buttons for the jets, temperature control, light, and any other features your spa may have are deactivated.
If Jets, Light button, or
(
+)
or
(
-)
 button
is pressed, the
SLOK
will display for several seconds, then turns off.
To deactivate the SPA LOCK, press the MODE ( or ) button in the TOOLS submenu until the SLOK+ symbol is illuminated on the display. Press the (
-)
 button to
deactivate the SPA LOCK feature.
16
OPERATING INSTRUCTIONS
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments
Related products and manuals for Above ground pools Watkins Caldera Spa Vacanza Series
Above ground pools Watkins Hot Spot Owner's Manual   (14 pages)
Above ground pools Watkins HotSpring Owner's Manual   (44 pages)
Above ground pools Watkins C45 Owner's Manual   (32 pages)
Above ground pools Watkins Caldera Spa Vacanza Series Owner's Manual   (16 pages)
Above ground pools Watkins Solana Owner's Manual   (15 pages)
  • SPEEDLINK Diversified-ceramics Newstar BOSER Technology Fluke-biomedical
  • Motorola Gateways/controllers Bernina Sewing machines Transcend Memory modules HoMedics Alarm clocks Sharp LCD TVs
  • Sony BDP-S3500 Bbk 9902S Bowers & Wilkins DS3 Roland KR-107 HP 20b Business Consultant Financial Calculator
  • E-flite UMX F4U Corsair RTF with AS3X User Manual Philips PET1031/12 User Manual Sam4s SPS-500 User Manual BMW 2008 X5 Owner's Manual